Market Forge STM-EL Sterilmatic Sterilizer - 95-3441
Key Features
- SKU
- 95-3441
- Brand
- Market Forge
- Condition
- New
- Warranty
- 1 Year Parts & Labor
- Affordable, dependable Market Forge Sterilmatic STM-EL for labs, veterinary clinics, and food processing plants
- Runs on basic tap water, saving the cost of distilled water that can pit the chamber
- Automatic temperature control with fast and slow exhaust for instruments, glassware, and liquids
- Spacious 16" diameter chamber sterilizes flasked solutions up to 1/2 gallon (2 liters)
Learn more: Description Specifications Documents
Market Forge Sterilmatic STM-EL Autoclave Sterilizer
Market Forge's Sterilmatic sterilizer is an affordable and dependable sterilizer that is perfect for laboratories, veterinary clinics, food processing plants, and more. This steam pressure autoclave was developed to meet the need for a compact, automatic, low-cost steam pressure sterilizer. The fact that it uses basic tap water instead of expensive distilled water is one of its most economical features. As a matter of fact, distilled water is harmful to the chamber, causing pits to appear within it. Market Forge's Sterilmatic stand can be ordered for maximum compactness. The sturdy stainless steel stand with adjustable leg extensions is designed to ensure that the unit can be installed and leveled over the existing contours in the floor. The open design lends itself to maximum sanitary conditions because of the ease of periodic cleaning. Despite its simplicity in design and appearance, the Market Forge Sterilmatic stand is ideal for mounting because it allows the secondary air to circulate freely all around.
From simple glassware to rubber gloves, the Sterilmatic has the capacity to sterilize everything from simple glassware to flasked solutions of up to 1/2 gallon (2 liters) in volume, making it a great addition to any well-equipped work region. The Sterilmatic is a simple device that allows for liquids and instruments to be sterilized with just a simple switch. It operates at 15 psi and contains simple instructions.
Standard Features
- Fast preheat Time
- Fast exhaust for instruments and glassware
- Slow exhaust for liquids
- Safety door automatically seals when pressurized
- External drainage
- Automatic temperature control
- Thermometer 180 degrees - 300 degrees F (82-149C)
- Safety Valve
- 0-30 lbs. steam gauge
- 0-60 minute timer
- Low water cut-off
- Thermostatic steam trap
- Signal light
- Flat perforated steam baffle
- Removable pan supports
- Adjustable 4" to 6" bullet feet
- Manual fill
Volume/Speed
- Reservoir: 4 gallons (15 liters)
- Timer range: 1-60 minutes
- Cycle time: Varies based on items to be sterilized (15-45 minutes)
- Preheat time: 10 minutes from cold start, 4 minutes from warm start
-
Adjustable temperature control can be set anywhere from 230 degrees
F to 250 degrees F (110 degrees - 121 degrees C) - Holds 2 Trays
Dimensions/Weight/Power
- Overall Size - 18-3/4" (48 cm)W x 30" (76.2 cm)L x 27-5/8" (70.2 cm)H
- Chamber - 16" (40.6 cm)Diameter x 26" (66 cm)L
- Tray Size - 11-1/2" (29.2 cm)W x 19-1/2" (49.5 cm)L x 2-3/4" (6.98 cm)H
- Unit Weight - 150 lbs. (68 kg)
- Electrical: 208-240 Volts, 9000-12,000 Watts, 60 Hz, 26-52 Amps
| Brand | Market Forge |
|---|---|
| Condition | New |
| SKU | 95-3441 |
| MPN | 95-3441 |
| Chamber Size | 16" x 26" (Ø x depth) |
| Chamber Volume | 85 L (5,220 cu in) |
| Compliance | ASME (National Board registered) |
| Cycle Time | 15–45 min (varies by load) · 10 min preheat (cold start) |
| Dimensions | 18.75"W x 30"L x 27.625"H (476 x 762 x 702 mm) |
| Power Usage | 9,000–12,000 W · 26–52 A |
| Temperature | 230°F–250°F (110°C–121°C) at 15 PSI |
| Tray Capacity | Holds 2 trays |
| Tray Size | 11.5"W x 19.5"L x 2.75"H (292 x 495 x 70 mm) |
| Voltage | 208–240V, 60 Hz |
| Warranty | 1 year (parts & labor) |
| Water Type | Tap water (do not use distilled/deionized) |
| Shipping Weight | 250.0 lb |
Full technical specifications are detailed in the product description above. Have a question? Call (501) 847-2332.