Tuttnauer 2340M Classic Manual Autoclave, Never Used

Tuttnauer 2340M Manual Autoclave, Never Used

This specific machine was acquired from a government agency. Although it's a 2001 model, it was new in the box and has never been used. It passed all of our diagnostic checks and runs great. It's in pristine condition and won't last long at this price.

The Tuttnauer 2340M Autoclave is a true workhorse within the sterilizer industry. It is specifically engineered for the high volume clinic or facility for active use, day in and day out.

This unit is a great sterilization tool for any size clinic or makes a reliable backup autoclave for an existing organization. This machine generates a fast turnaround time for those working is a busy setting. This autoclave is an electrically, heated sterilizer using steam as the sterilizing agent. It is a manually operated to devise, with a control system based upon steam pressure.

FEATURES

• Automatic shutoff at the end of sterilization and dry cycles.
• Front panel controls
• Safety device to prevent premature opening while unit is pressurized
• Front side drain valve for ease of releasing reservoir water
• Dual safety thermostat to protect against overheating
• Adheres to international certifications

VOLUME / SPEED

• 5 Gallons (19 Liters)
• Holds 3 trays
• Cycle time: Cold start - 27 minutes. Warm start - 13 Minutes

DIMENSIONS / WEIGHT / POWER

• Overall Size: 20" (50.8 cm) W x 21-1/2" (54.6 cm) L x 14-3/8" (36.5 cm) H
• Chamber Size: 9" (23 cm) D x 18-1/2" (47 cm) L
• Tray Size: 6-3/4" (17.1 cm) W x 16-3/8" (41.6 cm) L x 7/8" (2.22cm) H
• Unit Weight: 85 lbs (38.5 kg)
• Electrical: 120 Volts, 1400 Watts, 50/60 Hz, 12 Amps

This autoclave has been through our careful refurbishment process as follows:

• Thorough inspection of ALL components, cosmetics and functionality.
• Replace all worn or bad parts.
• Sand and paint the frame and chassis as needed.
• Clean reservoir tank by removing debris and particulates.
• Clean and polish chamber and reservoir. Blow out all lines.
• Replace safety mechanisms, controls, relays, condenser tube, overheat thermostat, valves, switches, filters and all other parts as needed.
• Clean and lubricate all moving parts.
• Inspect and repair all pressure and water leaks.
• Check and lube door closure. Replace door gasket.
• Test and calibrate to manufacturer's specifications.
• Repeated cycle testing for added assurance.
• Complete spore testing at various positions within the chamber.

Whats In the Box?

Never Used Tuttnauer 2340M Autoclave
Operator Manual
3 Trays and Handle
Power Cord
5 Biological Testing Strips